INDUSTRY
Type 06C02
|
Safety Valves, brass or stainless steel, type tested TÜV-SV.1090 S/G Standard safety valve with FPM valve seal, open bonnet, free discharge with lifting device Inlet: male thread type G (BSPP) acc. to ISO 228/1 Part No. 06C02.A001.X - brass Part No. 06C02.A002.X - stainless steel Available options - on request only: - Inlet NPT male thread - EPDM cone sealing (-20°C / -4°F up to +150°C / 320°F) Applications: Provided as safety device for protection against excessive pressure in stationary and moveable gas cylinders and pressure vessels. Approved for air and similar gases. Working temperature: -20°C / -4°F (253K) up to +160°C / +320°F (433K) |
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 
|
| Type 06C02 | Technical data | ||||||||
| Nominal size | GW | 1/4 | 3/8 | 1/2 | 3/8 | 1/2 | 3/4 | 3/4 | 1 |
| Orifice | d0 | 8 | 8 | 8 | 10 | 10 | 10 | 15 | 18 |
| Set pressure range | bar | 0.2-50 | 0.2-50 | 0.2-50 | 0.2-42 | 0.2-42 | 0.2-42 | 0.2-16 | 0.2-20 |
| Height | H | 78 | 78 | 78 | 81 | 81 | 81 | 92 | 110 |
| Length | L2 | 10 | 10 | 12 | 10 | 12 | 15 | 15 | 18 |
| Wrench size across flats | S1 | 21 | 21 | 27 | 27 | 27 | 32 | 32 | 41 |
| Weight | ca. kg | 0.14 | 0.15 | 0.18 | 0.18 | 0.20 | 0.25 | 0.31 | 0.53 |
| Coeff. of discharge from 3.0 bar* | αw | 0.70 | 0.70 | 0.70 | 0.61 | 0.61 | 0.61 | 0.60 | 0.60 |
| Dimensions in mm. * Below 3 bar the coefficient may be lower. Please pay attention to the capacity chart. |
|
Discharge capacities Calculation of flow rate acc. to AD2000-Merkblatt A2 Medium: Air in m³/h at 0°C and 1013.25 mbar The capacity indicated below is for a fully opened valve. d0 - orifice A0 - flow area
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
